3.7V to 1.5V Converter
Learn how to convert 3.7V to 1.5V using a buck converter or voltage regulator. Ideal for low-voltage electronics like sensors, microcontrollers, or low-power LEDs.
efficient 3.7v to 1.5v converter module
For making 3.7 V (e.g 3.7 LI-ion battery) into 1.5 V for low voltage devices, you can utilize a power efficient buck converter or adjustable linear regulator circuit. The aim is to switch-off stepwise the voltage keeping good output quality and minimal losses. This configuration is widely found in battery-powered devices, toys, sensors and microcontrollers which need 1.5V supply.
BC547 Voltage Output Formula:
Buck Converter Formula:
Vout = Vin × (D)
Where:
- Vout = Output Voltage
- Vin = Input Voltage (3.7V)
- D = Duty Cycle (Vout/Vin)
| Parameter | Value |
|---|---|
| Input Voltage | 3.7V |
| Output Voltage | 1.5V |
| Current Load | ~0.5A–1A |
| Regulator Type | Buck or LDO |
| Efficiency | 70–95% (buck) |
low voltage step-down converter
Find out how to change 3.7v to 1.5v with buck converter or voltage regulator. Perfect for low-voltage electronics – eg. sensors, microcontroller or very low power LEDs.
3.7v to 1.5v converter circuit
| Input (V) | Expected Output (V) | Actual Output (V) | Load (mA) |
|---|---|---|---|
| 3.7 | 1.5 | 1.49 | 500 |
| 3.6 | 1.5 | 1.48 | 300 |
| 3.8 | 1.5 | 1.50 | 700 |
Frequently Asked Questions - 3.7V to 1.5V Converter:
What is a 3.7V to 1.5V converter?
A voltage regulator circuit that steps down 3.7V to a stable 1.5V.
Which IC can I use for 3.7V to 1.5V?
Use LM317 (adjustable) or a buck converter like MP1584.
Is 3.7V to 1.5V efficient with LM317?
No, LM317 wastes power as heat; buck converters are better.
Can I use resistors to step down 3.7V to 1.5V?
Not reliably, as voltage changes with load.
Is a buck converter better than LDO?
Yes, it's more efficient with higher current loads.
What is the current limit for 3.7V to 1.5V?
Depends on your converter; usually 0.5A to 2A.
Can I power 1.5V devices from a 3.7V battery?
Yes, with a proper step-down regulator.
Can I use AMS1117 for 1.5V?
No, AMS1117 minimum dropout is too high for 3.7V to 1.5V.
What's the power loss using LM317?
Around 60%, depending on current and heatsinking.
Is heat dissipation important?
Yes, especially for linear regulators like LM317.
Related Posts
12V Charging Indicator Circuit
Easily monitor your 12V battery charging status with this LED-based indicator circuit. A simple and efficient solution for battery health monitoring.
3.7v battery level indicator circuit
A simple 3.7V battery level indicator circuit using LEDs to monitor charge status for lithium-ion batteries. Ideal for DIY electronics and portable devices.
12V to 5V Converter
Learn how a 5V voltage regulator circuit works, circuit diagram, applications, and how to regulate 12V or higher voltage down to stable 5V DC for electronics.
12V Negative Voltage Regulator
Learn how a 12V negative voltage regulator works. Circuit, applications, pinout, and FAQ included. Ideal for power supply stabilization in electronics projects.
Full Wave Bridge Rectifier Project
Learn how a full-wave bridge rectifier works using 4 diodes and a transformer. Explore working principles, circuit diagrams, and practical applications.
12V Charging Indicator circuit
Design a simple 12V charging indicator circuit using LEDs and transistors to visually show battery charging and full status for automotive or solar battery systems.